The Effect of Various Mouthwashes on the Surface Roughness and Discoloration of Provisional Fixed Materials
DOI:
https://doi.org/10.15517/7da69841Keywords:
3D printing; CAD/CAM; Temporary; Color; Surface properties.Abstract
This study aims to evaluate the effects of mouthwashes on surface roughness and discoloration of provisional materials produced by different methods. Disk-shaped specimens were prepared from conventional [acrylic- and composite-based (PEMA and BCR)] and digital methods (CAD/CAM milling and 3DP). Specimens were divided into 4 subgroups (Kloroben, Meridol, Aloe vera, and artificial saliva as control). Color and surface roughness (Ra) values were measured by spectrophotometer and profilometer at baseline and after mouthwash application. Color changes (∆E00 and ∆Eab) were calculated using L, a, and b values. In artificial saliva, the 3DP group's ∆E00 values were higher than CAD/CAM milling. ∆E00 and ∆Eab of the BCR group were higher than others after Meridol immersion. In Aloe vera, ∆E00 and ∆Eab values of the BCR group were higher than CAD/CAM milling. Ra values of BCR increased after all solutions, and 3DP increased after Aloe vera immersion. CAD/CAM milling and PEMA subgroups, artificial saliva, and Kloroben subgroups of BCR material exhibited clinically acceptable values (∆E00≤2.25). CAD/CAM milling specimens (except Kloroben) and PEMA artificial saliva group (∆Eab) also showed clinically acceptable values. Ra values of CAD/CAM milled (artificial saliva and Kloroben subgroups) and all 3DP subgroups were below the threshold (0.2 µm) for plaque accumulation.
Downloads
References
Bastos N.A., Bitencourt S.B., de Mello I.P., de Abreu C.W., Bombonatti J.F.S., Silva M.M. Effect of different beverages and storage period on bis-acryl color stability using two assessment methods. J Esthet Restor Dent. 2020; 32 (6): 575-580. DOI: https://doi.org/10.1111/jerd.12579
Ellakany P., Fouda S.M., AlGhamdi M.A., Aly N.M. Comparison of the color stability and surface roughness of 3-unit provisional fixed partial dentures fabricated by milling, conventional and different 3D printing fabrication techniques. J Dent. 2023; 131: 104458. doi: 10.1016/j.jdent.2023.104458. DOI: https://doi.org/10.1016/j.jdent.2023.104458
Song S.Y., Shin Y.H., Lee J.Y., Shin S.W. Color stability of provisional restorative materials with different fabrication methods. J Adv Prosthodont. 2020; 12 (5): 259-264. DOI: https://doi.org/10.4047/jap.2020.12.5.259
Al-Akhali A.A.M., Al-Hamzi M., Al-Shami I.Z., Al-Kholani A.I., Madfa A.A. Effect of khat extract on color stability of digitally and manually fabricated provisional restorations: an in vitro comparative study. BMC Oral Health. 2023; 23 (1): 700. DOI: https://doi.org/10.1186/s12903-023-03425-w
Magray A., Bashir A. An evaluation of color stability of temporary fixed partial denture materials: In vitro study. Int J Appl Dent Sci. 2019; 5 (2): 150-156.
Myagmar G., Daher R., Yeo I.L., Ahn J.S., Han J.S., Lee J.H. Color and surface stainability of additively and subtractively manufactured interim restorative materials against mouth rinses. J Prosthet Dent. 2023; 130 (6): 927-934. DOI: https://doi.org/10.1016/j.prosdent.2022.06.003
Pituru S.M., Greabu M., Totan A., Imre M., Pantea M., Spinu T., Tancu A.M.C., Popoviciu N.O., Stanescu I.I., Ionescu E. A review on the biocompatibility of PMMA-based dental materials for ınterim prosthetic restorations with a glimpse into their modern manufacturing techniques. Materials (Basel). 2020; 13 (13): 2894. DOI: https://doi.org/10.3390/ma13132894
Almejrad L., Yang C.C., Morton D., Lin W.S. The effects of beverages and surface treatments on the color stability of 3d-printed interim restorations. J Prosthodont. 2022; 31 (2): 165-170. DOI: https://doi.org/10.1111/jopr.13377
Shin J.W., Kim J.E., Choi Y.J., Shin S.H., Nam N.E., Shim J.S., Lee K.W. Evaluation of the color stability of 3D-printed crown and bridge materials against various sources of discoloration: an in vitro study. Materials (Basel). 2020; 13 (23): 5359. DOI: https://doi.org/10.3390/ma13235359
Yao Q., Morton D., Eckert G.J., Lin W.S. The effect of surface treatments on the color stability of CAD-CAM interim fixed dental prostheses. J Prosthet Dent. 2021;126 (2): 248-253. DOI: https://doi.org/10.1016/j.prosdent.2020.05.017
Espinar C., Bona A.D., Pérez M.M., Tejada-Casado M., Pulgar R. The influence of printing angle on color and translucency of 3D printed resins for dental restorations. Dent Mater. 2023; 39 (4): 410-417. DOI: https://doi.org/10.1016/j.dental.2023.03.011
Taşın S., Ismatullaev A., Usumez A. Comparison of surface roughness and color stainability of 3-dimensionally printed interim prosthodontic material with conventionally fabricated and CAD-CAM milled materials. J Prosthet Dent. 2022; 128 (5): 1094-1101. DOI: https://doi.org/10.1016/j.prosdent.2021.01.027
Sayegh S.M., Daou M., Najjar G., Zebouni E. In vitro comparison of the color degradation of two computer-aided design/computer-aided manufacturing provisional materials: A 12-month simulation. J Indian Prosthodont Soc. 2023; 23 (1): 38-44. DOI: https://doi.org/10.4103/jips.jips_119_22
Değer Y., Bakır M., Demirci F., Deveci B. Color stability of provisional restorative materials in different mouthwash solutions. Adv Mater Sci Eng. 2022; 2022 (1): 1-6. DOI: https://doi.org/10.1155/2022/9130117
Wahsh M., Saeed M. Surface roughness and color stability of provisional restorative materials fabricated using different methods after immersion in various storage media. Egypt Dent J. 2023; 69 (1): 683-695. DOI: https://doi.org/10.21608/edj.2022.180248.2374
Juntavee N., Juntavee A., Srisontisuk S. Color appearance of various provisional restorative materials for rehabilitation upon aging. Eur J Dent. 2023; 17 (4): 1263-1274. DOI: https://doi.org/10.1055/s-0042-1759886
Diken Türksayar A.A., Baytur S. Color stability, surface roughness and flexural strength of additively manufactured and milled interim restorative materials after aging. Odontology. 2023; 111 (3): 680-686. DOI: https://doi.org/10.1007/s10266-022-00778-6
Atala M.H., Yeğin E., Atala N., Senlen E., Bağlar S. Effects of mouthrinses on discoloration of CAD-CAM manufactured restorative materials. Am J Dent. 2019; 32 (6): 293-298.
Ertürk-Avunduk A.T., Aksu S., Delikan E. The effects of mouthwashes on the color stability of resin-based restorative materials. Odovtos-Int J Dent Sc. 2021; 23 (1): 91-102. DOI: https://doi.org/10.15517/ijds.2020.43004
Mahboub F., Nourizadeh A., Izadpanah A. The comparison of color stability of aloe vera gel and chlorhexidine solution on acrylic teeth. Int J Dent. 2022; 2022 (1): 6196803. DOI: https://doi.org/10.1155/2022/6196803
Tavangar M., Bagheri R., Kwon T.Y., Mese A., Manton D.J. Influence of beverages and surface roughness on the color change of resin composites. J Investig Clin Dent. 2018; 9 (3): 12333. DOI: https://doi.org/10.1111/jicd.12333
Yousief S.A., Alzahrani K.T., ALSharif M.F., Alamri A.H., Harthi B.A., Ashgan M.T., Alotaibi H.A. Effect of different solutions on two milled esthetic restorative materials. Int J Inn Res Med Sci. 2020; 5 (11): 493-501. DOI: https://doi.org/10.23958/ijirms/vol05-i11/988
Akay C., Tanış M.Ç., Gulverdiyeva M. Coloration of provisional restoration materials: a comparison of the effects of mouth rinses and green tea. Eur Oral Res. 2018; 52 (1): 20-26. DOI: https://doi.org/10.26650/eor.2018.35588
Coutinho C.A., Hegde D., Sanjeevan V., Coutinho I.F., Priya A. Comparative evaluation of color stability of three commercially available provisional restorative materials: An in vitro study. J Indian Prosthodont Soc. 2021; 21 (2): 161-166. DOI: https://doi.org/10.4103/jips.jips_622_20
Shenoy A., Rajaraman V., Maiti S. Comparative analysis of various temporary computer-aided design/computer-aided manufacturing polymethyl methacrylate crown materials based on color stability, flexural strength, and surface roughness: An in vitro study. J Adv Pharm Technol Res. 2022; 13 (1): 130-135. DOI: https://doi.org/10.4103/japtr.japtr_119_22
Luo M.R., Cui G., Rigg B. The development of the CIE 2000 color-difference formula: CIEDE2000. Color Res Appl. 2001; 26 (5): 340-50. DOI: https://doi.org/10.1002/col.1049
CIE. Technical report: improvement to industrial colour-difference evaluation. CIE Publication 142. Vienna: CIE Central Bureau; 2001.
Polychronakis N., Lagouvardos P., Polyzois G., Sykaras N., Zoidis P. Color changes of polyetheretherketone (PEEK) and polyoxymethelene (POM) denture resins on single and combined staining/cleansing action by CIELab and CIEDE2000 formulas. J Prosthodont Res. 2020; 64 (2): 159-166. DOI: https://doi.org/10.1016/j.jpor.2019.06.005
Kul E., Abdulrahim R., Bayındır F., Matori K.A., Gül P. Evaluation of the color stability of temporary materials produced with CAD/CAM. Dent Med Probl. 2021; 58 (2): 187-91. DOI: https://doi.org/10.17219/dmp/126745
Bozoğulları H.N., Yücel H.Ç. Effect of mouthwashes on color stability of artificial gingival materials used in ımplant retained hybrid prostheses. Selcuk Dent J. 2021; 8 (2): 538-544. DOI: https://doi.org/10.15311/selcukdentj.949614
Paravina R.D., Ghinea R., Herrera L.J., Bona A.D., Igiel C., Linninger M., Sakai M., Takahashi H., Tashkandi E., Perez Mdel M. Color difference thresholds in dentistry. J Esthet Restor Dent. 2015; 27 (1): 1-9. DOI: https://doi.org/10.1111/jerd.12149
Sham A.S., Chu F.C., Chai J., Chow T.W. Color stability of provisional prosthodontic materials. J Prosthet Dent. 2024; 91 (5): 447-452. DOI: https://doi.org/10.1016/j.prosdent.2004.03.005
Turgut S., Bagis B., Ayaz E.A., Ulusoy K.U., Altintas S.H., Korkmaz F.M., Bagis N. Discoloration of provisional restorations after oral rinses. Int J Med Sci. 2013; 10 (11): 1503-1509. DOI: https://doi.org/10.7150/ijms.6647
Ulusoy N.B., Arikan V., Akbay Oba A. Effect of mouthwashes on the discolouration of restorative materials commonly used in paediatric dentistry. Eur Arch Paediatr Dent. 2018; 19: 147-153. DOI: https://doi.org/10.1007/s40368-018-0341-0
Al-Samadani K.H. The effect of preventive agents (mouthwashes/gels) on the color stability of dental resin-based composite materials. Dent J (Basel). 2017; 5 (2): 18. DOI: https://doi.org/10.3390/dj5020018
Giti R., Dabiri S., Motamedifar M., Derafshi R. Surface roughness, plaque accumulation, and cytotoxicity of provisional restorative materials fabricated by different methods. PLoS One. 2021; 16 (4): 0249551. DOI: https://doi.org/10.1371/journal.pone.0249551
Özdoğan M.S. Evaluation of discoloration and mechanical properties of provisional resins after immersion in different mouthwashes. Int J Med Dent. 2020; 24 (4): 497-505.
Sen D., Göller G., Işsever H. The effect of two polishing pastes on the surface roughness of bis-acryl composite and methacrylate-based resins. J Prosthet Dent. 2002; 88 (5): 527-532. DOI: https://doi.org/10.1067/mpr.2002.129335
Celik A.C.T., Coban E., Ulker H.E. Effects of mouthwashes on color stability and surface roughness of three different resin-based composites. Niger J Clin Pract. 2021; 24 (4): 555-560. DOI: https://doi.org/10.4103/njcp.njcp_303_20
Golfeshan F., Ajami S., Khalvandi Y., Mosaddad S.A., Nematollahi H. Influence of herbal mouthwashes and chlorhexidine mouthwash on the physical characteristics of orthodontic acrylic resin. J Bıol Res-Boll Soc. 2020; 93 (1). DOI: https://doi.org/10.4081/jbr.2020.8949
Zica J.D.S.S., Fernandes I.A., Faria F.B.A., Ferreira F.C., Albuquerque N.A.R., Giovannini J.F.B.G., Costa L.C.M. Comparative analysis of the surface roughness of conventional resins and filling after immersion in mouthwashes. Braz J Oral Sci. 2020; 19: 1-11. DOI: https://doi.org/10.20396/bjos.v19i0.8658569
Cal E., Güneri P., Kose T. Digital analysis of mouthrinses' staining characteristics on provisional acrylic resins. J Oral Rehabil. 2007; 34 (4): 297-303. DOI: https://doi.org/10.1111/j.1365-2842.2007.01727.x
Gürdal P., Akdeniz B.G., Hakan Sen B. The effects of mouthrinses on microhardness and colour stability of aesthetic restorative materials. J Oral Rehabil. 2002; 29 (9): 895-901. DOI: https://doi.org/10.1046/j.1365-2842.2002.00924.x
Colucci V., Dos Santos C.D., Do Amaral F.L., Corona S.A., Catirse A.B. Influence of NaHCO3 powder on translucency of microfilled composite resin immersed in different mouthrinses. J Esthet Restor Dent. 2009; 21 (4): 242-248. DOI: https://doi.org/10.1111/j.1708-8240.2009.00269.x
Radwan H., Elnaggar G., El Deen I.S. Surface roughness and color stability of 3D printed temporary crown material in different oral media (In vitro study). Int J Appl Dent Sci. 2021; 7: 327-334. DOI: https://doi.org/10.22271/oral.2021.v7.i1e.1150
Eldiwany M., Friedl K.H., Powers J.M. Color stability of light-cured and post-cured composites. Am J Dent. 1995; 8 (4): 179-181.
Goldstein G.R., Schmitt G.W. Repeatability of a specially designed intraoral colorimeter. J Prosthet Dent. 1993; 69 (6): 616-619. DOI: https://doi.org/10.1016/0022-3913(93)90292-V
Mugri M.H., Jain S., Sayed M.E., Halawi A.H.A., Hamzi S.A.I., Aljohani R.A.S., Madkhali Z.M.A., Khalid A., Jokhadar H.F., Almarzouki M., Alhumaidan G.A., Alshahrani A.A., Alqahtani S.M., Alqahtani N.M., Lunkad H. Effects of smokeless tobacco on color stability and surface roughness of 3D-Printed, CAD/CAM-milled, and conventional denture base materials: An in vitro study. Biomedicines. 2023; 11 (2): 491. DOI: https://doi.org/10.3390/biomedicines11020491
Mickeviciute E., Ivanauskiene E., Noreikiene V. In vitro color and roughness stability of different temporary restorative materials. Stomatologija. 2016; 18 (2): 66-72.
Published
Issue
Section
License
Copyright (c) 2025 Zeynep Sahin, Nazire Esra Ozer.
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.
ODOVTOS - Int. J. Dent. Sc. endorses CC BY-NC-SA
This license enables reusers to distribute, remix, adapt, and build upon the material in any medium or format for noncommercial purposes only, and only so long as attribution is given to the creator. If you remix, adapt, or build upon the material, you must license the modified material under identical terms. CC BY-NC-SA includes the following elements:
BY: credit must be given to the creator.
NC: Only noncommercial uses of the work are permitted.
SA: Adaptations must be shared under the same terms.
