Skip to main navigation menu Skip to main content Skip to site footer

Scientific Papers

Vol. 13 No. 24 (2011): Journal 24

Mix design to evaluate its uniaxial compressive strength and permeability

DOI:
https://doi.org/10.15517/5v59qm66
Submitted
October 28, 2025
Published
2025-10-28

Abstract

Pervious concrete maybe used in low transit pavements, condominium and residential streets, or parking lots, among others. It is a mixture of cement, water and coarse aggregates. Strength and permeability are pervious concrete’s most important characteristics and must be correctly balanced to attain adequate performance.This study analyzed the effect of water/cement ratio, coarse aggregate/cement ratio, and the type of coarse aggregate used (maximum size and source) over 19 pervious concrete mixes. Behavior trends showing the relation between the stated properties and the uniaxial compressive strength and permeability of the material were observed from the results obtaine

References

  1. American Concrete Institute Committee 318. 318R-08: Building Code Requirements for Structural Concrete. Detroit, MI: American Concrete Institute. 2008.
  2. American Concrete Institute Committee 522. 522R-06: Pervious Concrete. Detroit, MI: American Concrete Institute. 2006.
  3. American Society for Testing and Materials. ASTM C 31-06: Standard Test Method for Making and Curing Concrete Test Specimens in the Field. Pennsylvania: ASTM. 2006.
  4. American Society for Testing and Materials. ASTM C 39-01: Standard test method for compressive strength of cylindrical concrete specimens. Pennsylvania: ASTM. 2002.
  5. Crouch, L., Cates, M., Dotson, J., Honeycutt, K., Badoe, D. Measuring the Effective Air Void Content of Portland Cement Pervious Pavements. Cement, Concrete, and Aggregates, Vol. 25, No. 1. United States: ASTM. 2003.
  6. Crouch, L., Smith, N., Walker, A., Dunn, T., & Sparkman, A. Determining Pervious PCC Permeability with a Simple Triaxial Flexible – Wall Constant Head Permeameter. United States: Tennessee Concrete Association. 2005.
  7. Crouch, L., Smith, N., Walker, A., Dunn, T., & Sparkman, A. Pervious PCC Compressive Strength in the Laboratory and the Field: The Effects of Aggregate Properties and Compaction Effort. United States: Tennessee Concrete Association. 2005.
  8. Crouch, L., Sparkman, A., Dunn, T., & Hewitt, R.(Estimating pervious PCC pavement design with compressive strength and effective air void content.) United States: National Ready Mixed Concrete Association. 2006.
  9. Fernández, L., Vítola, L., Salminci, P. (Estado del arte en el uso de hormigones porosos.) Argentina: Instituto del Cemento Portland. 2001.
  10. Fernández, R. Concreto Permeable: Diseño de mezclas para evaluar su resistencia a la compresión uniaxial y su permeabilidad. Informe de proyecto de graduación para optar por el grado de Licenciatura en Ingeniería Civil, Universidad de Costa Rica, San José, Costa Rica. 2008.
  11. Ministerio de Economía, Industria y Comercio. RTCR 383, Cemento hidráulico, especificaciones. Costa Rica. Periódico La Gaceta. 2004.
  12. Mulligan, A. Attainable compressive strength of pervious concrete paving systems. United States: University of Central Florida. 2005.
  13. Murillo, R. Estudio de intensidades de lluvia en la cuenca del Río Virilla. Informe de proyecto de graduación para optar por el grado de Licenciatura en Ingeniería Civil, Universidad de Costa Rica, San José, Costa Rica. 1994.
  14. National Concrete Pavement Technology Center.Mix design development for pervious concrete in cold weather. United States: Center for Transportation, Iowa State University. 2006.
  15. Neithalath, N., Weiss, J., Olek, J. Characterizing Enchanced Porosity Concrete using electrical impedance to predict acoustic and hydraulic performance. Cement and Concrete Research. United States: Science Direct. 2006.
  16. Neithalath, N., Weiss, J., Olek, J. Predicting the permeability of Pervious Concrete (Enhanced Porosity Concrete) from Non-Destructive Electrical Measurements. United States: Purdue University. 2006.
  17. Tennessee ReadyMixed Concrete Association. Preliminary specifications for Portland cement pervious concrete pavement. United States. 2005.

Downloads

Download data is not yet available.