Keywords
Cemento provisional; Coronas provisionales; CAM/CAD; Impresora 3D.
How to Cite
Abstract
The color stability of temporary restoration is crucial, especially in sensitive areas in terms of aesthetics. This research aimed to determine the effect of temporary cement on the color of temporary crowns made by conventional pressing methods (indirect) and CAM/CAD technologies using milling machines and 3D printers. This study was carried out in a laboratory, utilizing A2 color in all manufacturing methods. The color of the restorations was measured by a spectrophotometer after cementation with semi-permanent resin cement. Subsequently, color changes of the samples (ranging from 0 to 100) were calculated using the Commission International de l'Eclairage (CIE) Lab system. Data analysis was based on descriptive statistics methods and statistical tests, including one-way analysis of variance (ANOVA) and Tukey's post hoc test. According to the results of ANOVA, there was a significant difference between the three groups in terms of the 'a' and 'b' indexes (P<0.001). However, regarding the 'l' index, no significant difference was observed among the three groups (P=0.250). Also, based on Tukey's post hoc test, a significant relationship was seen between the first and second pairs in the 3D printer group, and between the first and third pairs in the milling group (P<0.001). However, no significant difference was observed in the conventional pressing group. The results showed that the 3D printing method exhibited the highest amount of color change among the three methods, while the milling method demonstrated the lowest amount of change.
References
Lawaf S., Azizi A., Sabzevari H. Comparison of Dimensional Changes and Water Absorption of Three Acrylic Resins Used for Provisional Fixed Restorations. Journal of Dentistry, 2009; 10 (4): 286-292.
Kerby R.E., Knobloch L.A., Sharples S., Peregrina A. Mechanical properties of urethane and bis-acryl interim resin materials. The Journal of prosthetic dentistry. 2013; 110 (1): 21-8.
Cakan U., Kara H.B. Effect of liquid polishing materials on the stainability of bis-acryl interim restorative material in vitro. J Prosthet Dent2015; 113 (5): 475-9.
Van Noort R. The future of dental devices is digital. Dental materials. 2012; 28 (1): 3-12.
Bajoghli F., Fathi A., Ebadian B., Jowkar M., Sabouhi M. The effect of different methods of cleansing temporary cement (with and without eugenol) on the final bond strength of implant-supported zirconia copings after final cementation: An in vitro study. Dent Res J 2023; 20: 22.
Rosenstiel S.F., Land M.F., Walter R. Contemporary fixed prosthodontics-e-book: Elsevier Health Sciences; 2022.
Hernandez E., Oshida Y., Platt J., Andres C., Barco M., Brown D. Mechanical properties of four methylmethacrylate-based resins for provisional fixed restorations. Biomed Mater Eng. 2004;14 (1):107-22.
Vandenberghe B. The digital patient-Imaging science in dentistry. J Dent. 2018 Jul; 74 Suppl 1: S21-S26.
Park J.-M., Hong Y.-S., Park E.-J., Heo S.-J., Oh N. Clinical evaluations of cast gold alloy, machinable zirconia, and semiprecious alloy crowns: A multicenter study. J Prosthet Dent. 2016; 115 (6): 684-91.
Stansbury J.W., Idacavage M.J. 3D printing with polymers: Challenges among expanding options and opportunities. Dent Mater. 2016; 32 (1): 54-64.
Singh V. Rapid prototyping, materials for RP and applications of RP. Int J Eng Res Sci. 2013; 4 (7): 473-80.
Shayegh S.S., Hakimaneh S.M.R., Derakhshi H. Three-Dimensional Printers and Their Application in Dental Prostheses. Journal of Mashhad Dental School. 2022; 46 (2): 112-34.
Shamseddine L., Mortada R., Rifai K., Chidiac J.J. Marginal and internal fit of pressed ceramic crowns made from conventional and computer-aided design and computer-aided manufacturing wax patterns: An in vitro comparison. The Journal of prosthetic dentistry. 2016; 116 (2): 242-8.
Koch G.K., Gallucci G.O., Lee S.J. Accuracy in the digital workflow: From data acquisition to the digitally milled cast. J Prosthet Dent. 2016; 115 (6): 749-54.
Hull C.W. Apparatus for production of three-dimensional objects by stereolithography. United States Patent, Appl, No 638905, Filed. 1984.
Ngo T.D., Kashani A., Imbalzano G., Nguyen K.T., Hui D. Additive manufacturing (3D printing): A review of materials, methods, applications and challenges. Composites Part B: Engineering. 2018;143:172-96.
Barghi N., Simmons Jr E.W. The marginal integrity of the temporary acrylic resin crown. J Prosthet Dent. 1976; 36 (3): 274-7.
Yildirim B., Recen D., Tekeli Simsek A. Effect of cement color and tooth-shaded background on the final color of lithium disilicate and zirconia-reinforced lithium silicate ceramics: An in vitro study. J Esthet Restor Dent. 2021; 33 (2): 380-6.
Tabatabaian F., Khodaei M.H., Namdari M., Mahshid M. Effect of cement type on the color attributes of a zirconia ceramic. J Adv Prosthodont. 2016; 8 (6): 449-56.
Shillingburg H.T. Fundamentals of Fixed Prosthodontics 4th edition Quintessence Pub Co March 30, 2012.
Mai H.N., Lee K.B., Lee D.H. Fit of interim crowns fabricated using photopolymer-jetting 3D printing. J Prosthet Dent. 2017 Aug; 118 (2): 208-15.
Powers J.M., Wataha J.C., Chen Y.W., Craig R.G. Dental materials: foundations and applications, Elsevier Inc. 2017.
Rayyan M.M., Aboushelib M., Sayed N.M., Ibrahim A., Jimbo R. Comparison of interim restorations fabricated by CAD/CAM with those fabricated manually. J Prosthet Dent. 2015; 114 (3): 414-9.
Perry R.D., Magnuson B. Provisional materials: key components of interim fixed restorations. Compend Contin Educ Dent. 2012 Jan; 33 (1): 59-60, 62. PMID: 22432178.
Regish K.M., Sharma D., Prithviraj D.R. Techniques of fabrication of provisional restoration: an overview. Int J Dent. 2011; 2011: 134659. doi: 10.1155/2011/134659. Epub 2011 Oct 12. PMID: 22013441; PMCID: PMC3195530.
Alharbi N., Osman R., Wismeijer D. Effects of build direction on the mechanical properties of 3D-printed complete coverage interim dental restorations. J Prosthet Dent. 2016; 115 (6): 760-7.
Tin-Oo M.M., Saddki N., Hassan, N. Factors influencing patient satisfaction with dental appearance and treatments they desire to improve aesthetics. BMC Oral Health. 2011; 11 (6). https://doi.org/10.1186/1472-6831-11-6
Pohjola R.M., Hackman S.T., Browning W.D. Evaluation of a standard shade guide for color change after disinfection. Quintessence Int. 2007; 38 (8): 671-6. PMID: 17823685.
Alamri M.D. The effect of disinfecting solutions on the color of porcelain shade guides. Egypt Dent J. 2008; 54 (2): 1057-66.
Harsono M., Simon J.F., Stein J.M., Kugel G. Evolution of chairside CAD/CAM dentistry. Tex Dent J. 2013; 130 (3): 238-44. PMID: 23734548.
Lee W.-S., Lee D.-H., Lee K.-B. Evaluation of internal fit of interim crown fabricated with CAD/CAM milling and 3D printing system. J Adv Prosthodont. 2017; 9 (4): 265-70.
Mai H.-N., Lee K.-B., Lee D.-H. Fit of interim crowns fabricated using photopolymer-jetting 3D printing. J Prosthet Dent. 2017; 118 (2): 208-15.
Digholkar S., Madhav V., Palaskar J. Evaluation of the flexural strength and microhardness of provisional crown and bridge materials fabricated by different methods. J Indian Prosthodont Soc. 2016; 16 (4): 328.
Dede D.Ö., Sahin O., Özdemir O.S., Yilmaz B., Celik E., Köroğlu A. Influence of the color of composite resin foundation and luting cement on the final color of lithium disilicate ceramic systems. J Prosthet Dent. 2017; 117 (1): 138-43.
Malkondu O., Tinastepe N., Kazazoglu E. Influence of type of cement on the color and translucency of monolithic zirconia. J Prosthet Dent. 2016; 116 (6): 902-8.
Comments
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.
Copyright (c) 2023 CC-BY-NC-SA 4.0