Determinación del módulo de elasticidad de dos concretos autocompactantes de alta resistencia (70 MPa)

Minor Eduardo Murillo Chacón; Manfred Ramírez Castro

doi:10.15517/mym.v10i0.39072

Articles

Vol. 10 No. 10 (2020): Enero - Diciembre 2020

Determination of the elasticity module of two high-resistance self-compacting concrets (70 MPa)

Minor Eduardo Murillo Chacón^▸^▾
Manfred Ramírez Castro^▸^▾

PDF (Spanish)

DOI:: https://doi.org/10.15517/mym.v10i0.39072
Submitted: September 4, 2025
Published: 2025-09-04

Abstract

The modulus of elasticity is a property of great importance in the structural calculation, which allows understanding the relationship between the stress and the deformation of an evaluated material, in this matter, a correct prediction of the modulus of elasticity of concrete allows the Structural Engineer design elements or structures that perform as it were conceived.

In this investigation an equation to calculate the modulus of elasticity determine were determined for two mixtures of self-compacting concrete (SCC) with nominal strength of 70 MPa at the age of twenty-eight days.
The only variable analyzed in this study was the type of hydraulic cement: cement modified with initial high strength limestone and modified cement with pozzolana. For fresh concrete the following testwere analyzed
comparatively: temperature (ASTM C1064), unit weight (ASTM C138), air content (ASTM C231) and unrestricted flow (ASTM C1611). For hardened concrete, the compressive strength (ASTM C39), elastic modulus, Poisson ratio and shear modulus (ASTM C469) were studied.

References

ACI committee. 237.237R-07 Self-Consolidating Concrete. Impreso en U.S.A. Preparado por el Comité ACI 237.
ACI committee 305.ACI 305.1-14 Specification for Hot Weather Concreting.Impresoen USA. Preparado por el comité ACI 305.
ACI committee 318. ACI 318S-14 Requisitos de Reglamento para Concreto Estructural e ACI 318RS-14 Comentario de Requisitos de Reglamento para Concreto Estructural. Impreso en U.S.A Preparado por el comité ACI 318.
ACI committe 363. ACI 363R-10 Report on High-Strength Concrete. Impres.en U.S.A. Preparado por el comité ACI 363.
Aїtcin,P.C. (2008). Concreto de alto desempeño. 1ed, Costa Rica: Editorial Jiménez&Tanzi.
American Society for Testing and Materials. (2018). ASTM C31 / C31M-18b, Standard Practice for Making and Curing Concrete Test Specimens in the Field, ASTM International, West Conshohocken, PA.
American Society for Testing and Materials. (2017). ASTM C29 / C29M-17a, Standard Test Method for Bulk Density (“Unit Weight”) and Voids in Aggregate, ASTM International, West Conshohocken, PA.
American Society for Testing and Materials. (2018). ASTM C39 / C39M-18, Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens, ASTM International, West Conshohocken, PA.
American Society for Testing and Materials. (2015). ASTM C127-15, Standard Test Method for Relative Density (Specific Gravity) and Absorption of Coarse Aggregate, ASTM International, West Conshohocken, PA.
American Society for Testing and Materials. (2015). ASTM C128-15, Standard Test Method for Relative Density (Specific Gravity) and Absorption of Fine Aggregate, ASTM International, West Conshohocken, PA.
American Society for Testing and Materials. (2014). ASTM C136 / C136M-14, Standard Test Method for Sieve Analysis of Fine and Coarse Aggregates, ASTM International, West Conshohocken, PA.
American Society for Testing and Materials. (2017). ASTM C138 / C138M-17a, Standard Test Method for Density (Unit Weight), Yield, and Air Content (Gravimetric) of Concrete, ASTM International, West Conshohocken, PA.
American Society for Testing and Materials. (2016). ASTM C192 / C192M-16a, Standard Practice for Making and Curing Concrete Test Specimens in the Laboratory, ASTM International, West Conshohocken, PA.
American Society for Testing and Materials. (2017). ASTM C231 / C231M-17a, Standard Test Method for Air Content of Freshly Mixed Concrete by the Pressure Method, ASTM International, West Conshohocken, PA.
American Society for Testing and Materials. (2014). ASTM C469 / C469M-14, Standard Test Method for Static Modulus of Elasticity and Poisson’s Ratio of Concrete in Compression, ASTM International, West Conshohocken, PA.
American Society for Testing and Materials. (2015). ASTM C470 / C470M-15, Standard Specification for Molds for Forming Concrete Test Cylinders Vertically, ASTM International, West Conshohocken, PA.
American Society for Testing and Materials. (2013). ASTM C566-13, Standard Test Method for Total Evaporable Moisture Content of Aggregate by Drying, ASTM International, West Conshohocken, PA.
American Society for Testing and Materials. (2003). ASTM C1064 / C1064M-03, Standard Test Method for Temperature of Freshly Mixed Portland Cement Concrete, ASTM International, West Conshohocken, PA.
American Society for Testing and Materials. (2018). ASTM C1611 / C1611M-18, Standard Test Method for Slump Flow of Self-Consolidating Concrete, ASTM International, West Conshohocken, PA.
American Society for Testing and Materials. (2015). ASTM C1758 / C1758M-15, Standard Practice for Fabricating Test Specimens with Self-Consolidating Concrete, ASTM International, West Conshohocken, PA.
Aragón Másis, S. (2004). Determinación del módulo de elasticidad de concretos normales y de alto desempeño en Costa Rica. Informe de Trabajo de Graduación para obtener el grado de Licenciado en Ingeniería Civil. Escuela de Ingeniería Civil. Universidad de Costa Rica.
Comité de Certificación de programas del ACI.CP-1S (15) (2015). Técnico para pruebas al concreto en la obra-Grado l. Farmington Hills, Michigan: Instituto Americano del concreto.
McCormac; J.C; Brown, R.H. (2011). Diseño de concreto reforzado. México: Alfaomega Grupo Editor,S.A.de C.V.
Kosmatka, S.H.; Kerkhoff, B.; Panarese, W. C.; y Tanesi, J. (2004) Diseño y Control de Mezclas de Concreto, Skokie, Illinois, EE.UU: Portland Cement Association.
Nilson, A. H. (2001). Diseño de estructuras de concreto. Santafé de Bogotá Colombia: Mc Graw Hill Interamericana S.A.
Popov, E. (2000). Mecánica de sólidos, México: Editorial Pearson, Educación.

Keywords

Modulus of elasticity
Self-compacting ConcreteEliminar Self-compacting Concrete
High Strength Concrete

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

How to Cite

Determination of the elasticity module of two high-resistance self-compacting concrets (70 MPa). (2025). Métodos Y Materiales, 10(10), 12-21. https://doi.org/10.15517/mym.v10i0.39072

Similar Articles

Andrea Suárez Ferrufino, Jacqueline Aidee Tola Colque, Romina Mendez Torrez, Joaquin Humberto Aquino Rocha, Influence of the superplasticizing additive in concrete with lateritic aggregate , Métodos y Materiales: Vol. 12 No. 12 (2022): Enero - Diciembre 2022
Einer Rodríguez Rojas, Flor de María Muñoz Umaña, José David Sandoval González, Technical evaluation of the effectiveness of curing products as an option to wet curing of concrete , Métodos y Materiales: Vol. 12 No. 12 (2022): Enero - Diciembre 2022
Ana Lorena Monge Sandí, Andrés Abarca Jiménez, Comparison of determination of mechanical properties in reinforcing bars for concrete with axial extensometer conventional and laser extensometer , Métodos y Materiales: Vol. 3 No. 3 (2013): Enero - Diciembre 2013
Sócrates Pedro Muñoz Pérez, Jhonathan Janmarco Burga Carrasco, Renato Cordava Guerrero, Jesús Alberto Castro Palma, Kristell Esteffania Bonilla Bances, Sandro Enrique Ramos Castillo, The Use of mineral additive as a modifier of the mechanical properties in concrete: a review , Métodos y Materiales: Vol. 11 No. 11 (2021): Enero - Diciembre 2021
Einer Rodríguez Rojas, Flor de María Muñoz Umaña, Compressive strength development of concrete with modified cements , Métodos y Materiales: Vol. 10 No. 10 (2020): Enero - Diciembre 2020
Guillermo González Beltrán, Ana Monge Sandí, Recommendations for obtaining reliable results of resistance of concrete cylinders , Métodos y Materiales: Vol. 1 No. 1 (2011): Enero - Diciembre 2011
Einer Rodríguez Rojas, Luis Felipe Hernández mora, Flor de María Muñoz Umaña, Compressive strength versus curing time in hydraulic concrete from modified cements , Métodos y Materiales: Vol. 9 No. 9 (2019): Enero - Diciembre 2019
Francisco Villalobos Ramírez, José Pablo Alfaro Martínez, Experimental Tests to Determine the Capacity of Prefabricated Concrete Columns , Métodos y Materiales: Vol. 2 No. 2 (2012): Enero - Diciembre 2012
Nidia Cruz Zuñiga, Daniela Ramírez Picado, Evaluation of samples of the coarse aggregate from concrete wates to produce new concrete , Métodos y Materiales: Vol. 12 No. 12 (2022): Enero - Diciembre 2022
Francisco Villalobos Ramírez, Kenneth J. Paniagua Murillo, Evaluation of a modification in ASTM C1609 standard for the study of synthetic fiber reinforced concrete under flexural load , Métodos y Materiales: Vol. 10 No. 10 (2020): Enero - Diciembre 2020

1-10 of 30 Next

You may also start an advanced similarity search for this article.

[1] ACI committee. 237.237R-07 Self-Consolidating Concrete. Impreso en U.S.A. Preparado por el Comité ACI 237.

[2] ACI committee 305.ACI 305.1-14 Specification for Hot Weather Concreting.Impresoen USA. Preparado por el comité ACI 305.

[3] ACI committee 318. ACI 318S-14 Requisitos de Reglamento para Concreto Estructural e ACI 318RS-14 Comentario de Requisitos de Reglamento para Concreto Estructural. Impreso en U.S.A Preparado por el comité ACI 318.

[4] ACI committe 363. ACI 363R-10 Report on High-Strength Concrete. Impres.en U.S.A. Preparado por el comité ACI 363.

[5] Aїtcin,P.C. (2008). Concreto de alto desempeño. 1ed, Costa Rica: Editorial Jiménez&Tanzi.

[6] American Society for Testing and Materials. (2018). ASTM C31 / C31M-18b, Standard Practice for Making and Curing Concrete Test Specimens in the Field, ASTM International, West Conshohocken, PA.

[7] American Society for Testing and Materials. (2017). ASTM C29 / C29M-17a, Standard Test Method for Bulk Density (“Unit Weight”) and Voids in Aggregate, ASTM International, West Conshohocken, PA.

[8] American Society for Testing and Materials. (2018). ASTM C39 / C39M-18, Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens, ASTM International, West Conshohocken, PA.

[9] American Society for Testing and Materials. (2015). ASTM C127-15, Standard Test Method for Relative Density (Specific Gravity) and Absorption of Coarse Aggregate, ASTM International, West Conshohocken, PA.

[10] American Society for Testing and Materials. (2015). ASTM C128-15, Standard Test Method for Relative Density (Specific Gravity) and Absorption of Fine Aggregate, ASTM International, West Conshohocken, PA.

[11] American Society for Testing and Materials. (2014). ASTM C136 / C136M-14, Standard Test Method for Sieve Analysis of Fine and Coarse Aggregates, ASTM International, West Conshohocken, PA.

[12] American Society for Testing and Materials. (2017). ASTM C138 / C138M-17a, Standard Test Method for Density (Unit Weight), Yield, and Air Content (Gravimetric) of Concrete, ASTM International, West Conshohocken, PA.

[13] American Society for Testing and Materials. (2016). ASTM C192 / C192M-16a, Standard Practice for Making and Curing Concrete Test Specimens in the Laboratory, ASTM International, West Conshohocken, PA.

[14] American Society for Testing and Materials. (2017). ASTM C231 / C231M-17a, Standard Test Method for Air Content of Freshly Mixed Concrete by the Pressure Method, ASTM International, West Conshohocken, PA.

[15] American Society for Testing and Materials. (2014). ASTM C469 / C469M-14, Standard Test Method for Static Modulus of Elasticity and Poisson’s Ratio of Concrete in Compression, ASTM International, West Conshohocken, PA.

[16] American Society for Testing and Materials. (2015). ASTM C470 / C470M-15, Standard Specification for Molds for Forming Concrete Test Cylinders Vertically, ASTM International, West Conshohocken, PA.

[17] American Society for Testing and Materials. (2013). ASTM C566-13, Standard Test Method for Total Evaporable Moisture Content of Aggregate by Drying, ASTM International, West Conshohocken, PA.

[18] American Society for Testing and Materials. (2003). ASTM C1064 / C1064M-03, Standard Test Method for Temperature of Freshly Mixed Portland Cement Concrete, ASTM International, West Conshohocken, PA.

[19] American Society for Testing and Materials. (2018). ASTM C1611 / C1611M-18, Standard Test Method for Slump Flow of Self-Consolidating Concrete, ASTM International, West Conshohocken, PA.

[20] American Society for Testing and Materials. (2015). ASTM C1758 / C1758M-15, Standard Practice for Fabricating Test Specimens with Self-Consolidating Concrete, ASTM International, West Conshohocken, PA.

[21] Aragón Másis, S. (2004). Determinación del módulo de elasticidad de concretos normales y de alto desempeño en Costa Rica. Informe de Trabajo de Graduación para obtener el grado de Licenciado en Ingeniería Civil. Escuela de Ingeniería Civil. Universidad de Costa Rica.

[22] Comité de Certificación de programas del ACI.CP-1S (15) (2015). Técnico para pruebas al concreto en la obra-Grado l. Farmington Hills, Michigan: Instituto Americano del concreto.

[23] McCormac; J.C; Brown, R.H. (2011). Diseño de concreto reforzado. México: Alfaomega Grupo Editor,S.A.de C.V.

[24] Kosmatka, S.H.; Kerkhoff, B.; Panarese, W. C.; y Tanesi, J. (2004) Diseño y Control de Mezclas de Concreto, Skokie, Illinois, EE.UU: Portland Cement Association.

[25] Nilson, A. H. (2001). Diseño de estructuras de concreto. Santafé de Bogotá Colombia: Mc Graw Hill Interamericana S.A.

[26] Popov, E. (2000). Mecánica de sólidos, México: Editorial Pearson, Educación.